Untitled 1
Introducing 2010's
newest wireless microphone from BMB, the UHF-1000, the
world's first UHF Diversity Multi-Channel Rack-mountable Dual Wireless
Microphone System with auto-channel-scan and infrared-channel-sync functions!
Just the name itself sounds very impressive. This UHF-1000
professional wireless microphone system combines many features that surpasses
most of the professional microphones in the market, we even put an 'X' and
called it the 'eXtreme Edition' because it pushes the microphone functionalities
to the limit and set a new standard for future microphone designs. This
microphone is guaranteed to be the best value microphone you can find in the
market.
Exclusive Features:
UHF 1000 Channels: Yes, the UHF-1000 has Multi selectable channels in the
UHF MHz range. You can for sure find an unoccupied channel for you to use. With
1000 channels, you can have up 500 sets of dual microphone systems to be used
simultaneously without any interference.
Auto-Channel-Scan Function: Finding the cleanest channel among the 1000
available channels is one of the most difficult task for users. The UHF-1000 has
a built-in 'intelligent' circuit that can scan the entire 1000 channels to
identify the cleanest possible channel for you to use. The entire scanning
process would take about 1 minute. However, you can stop the auto-scan function
at anytime to pick out the best channel that it has found during the scanning
process.
Infrared-Channel-Sync Function: Setting your microphone to match the same
channel as the receiver is a daunting task especially if there are 1000 possible
channels to choose from. However, with the 'Infrared-Channel-Sync' function,
there is nothing needed to be adjusted on the microphone. In fact, there is no
channel setting button on the microphone. Once you have found your desired
channel, all you have to do is press the 'Infrared Sync' on the receiver, and it
will send the new frequency information to your handheld receiver by infrared.
When your microphone recognized the signal, it will change its frequency
automatically to match the receiver's new frequency, and you are ready to use!
It's that easy.
Diversity Receiver: The UHF-1000 has built-in diversity receivers which
often provide better wireless microphone performance because it utilizes two
separate antennas and it has two separate tuners. The "intelligent" circuit in
the receiver automatically and constantly selects the better of the two signals.
Since one of the antennas will almost certainly be receiving a clean signal at
any given moment, the chances of a dropout occurring are reduced.
Rack-mountable and Front-Antenna Design: This wireless receiver can be
mounted inside any 19" rack case and the front-antenna design is much more
convenient to adjust its angle and it's more extendable than the traditional
rear-antenna design system which the antenna is harder to reach and gets weaker
reception inside a rack case.
One Button Microphone Operation: The handheld microphone has only one
button. It's very simple and easy to operate. When you pressed for 1 second, it
will turn the microphone on or off. When you pressed for a quick release, it
will put the microphone on MUTE status or it will search for an infrared signal
from the receiver for channel-sync.
Module Removable Microphone Head: The UHF-1000 handheld transmitter comes
with a microphone head that's designed for a singer's voice range. However, this
component can be easily replaced with an instrument head that's designed
specifically to pick up musical instrument's sound frequency without changing
the transmitter itself. This convenient design can save you money on buying a
new microphone system for your instrumental performance needs.
Dual LCD Status Display: The LCD screens provide informative status on
each microphone's status including: Signal Strength, Audio Level, Operation
Frequency and Diversity Antenna Selection which gives the user a clear
operational status.
Dual Identical Microphone Design: The two handheld microphone
transmitters are designed to be identical. Whichever microphone is synchronized
with the receiver becomes operational. This identical design allows you to carry
only 1 spare microphone for backup if either microphone becomes inoperable.
Dent-Resistant Microphone Grille Design: The dent-resistant and
rust-resistant grille is made from hardened steel mesh. This durable screw-on
style microphone grille protects the microphone diaphragm from all kinds of
abusive or accidental damages.
FREE:
UPS Ground Shipping Within 48 States
